Care Tips For Ensuring Long Lasting Appeal Of Your Striker Metal Bed

Binary Ecommerce Experts

September 9, 2023

Binary Ecommerce Experts

·

A striker metal bed is popular. This stylish, elegant, and sturdy bed enhances the aesthetics of any used bedroom. Offered in two timeless colours, this modern bed is cohesive with any décor theme. The striker metal bed is available in various sizes, such as a single metal bed and a double metal bed. You can buy bed online in your preferred size and colour.

As your striker metal bed is the focal point of your sleeping haven, you want to preserve its exceptional appeal for a long time. Read the care guide for expert tips for maintaining your striker metal bed for a long time.

Expert Maintenance Tips For Striker Metal Bed

The striker metal bed is a sturdy and durable modern bed. This robust metal bed is constructed from premium metal and has an anti-rust finish. However, even a sturdy metal bed requires regular upkeep to maintain its appeal.

Here are the best Striker metal bed maintenance tips for regular cleaning:

Regular Dust Cleaning

Dust and grime can be very damaging, especially when left to accumulate. In fact, dust and grime gathered in the nooks and crannies of your metal bed can turn to rust aided by environmental or other moisture. Rusting happens when the iron of the bed reacts with the moisture and oxygen in the air. Though the striker metal bed has an anti-rust coating, dust scrapes off the finish to expose the metal when dust gathers. So, to avoid dust from gathering, regularly clean your metal bed. To do so, use a nylon brush or a microfiber cloth. Don’t use a brush with harsh bristles, as it will scratch your modern bed.

Detergent For Stains

You should always clean your striker metal bed with a dry brush; however, sometimes, it can have tough stains or dirt marks. Don't use harsh cleaners to clean the stains or dirt marks. Use a simple solution of everyday detergent with lukewarm water. Mix a bit of detergent with water in a mug or tub and dip a soft cloth in it. Use the cloth to clean the stains. In case of tough stains that are resistant to cloth, use a toothbrush. However, remember to rub the toothbrush gently. Then, wipe the detergent solution with another cloth dipped in clean and cold water. After cleaning the stains, take a clean and dry towel and remove all the moisture. Ensure the bed surface is absolutely dry.

Check out Ecoair™ Latex Mattress at Nilkamal Sleep

Away From Heat

Metal can get damaged when exposed to heat. It quickly gets heated up, damaging the protective finish or the paint. So, keep your metal bed away from any heat source, such as room heaters and direct sunlight.

Avoid Abrasive Things

Your metal bed is sturdy and tough. However, abrasive objects can scratch it, damaging its looks. So, avoid cleaning it with abrasive objects or chemicals and accidentally scratching it with sharp objects.

Prevent Rust Formation

Rust is better prevented than cured. Though it may seem rust is inevitable with a metal bed. The best way to keep rust at bay is to avoid moisture. So, immediately wipe away the moisture with a dry cloth in case of accidental spilling or during cleaning. During humid months, be extra vigilant. Keep your bed away from the window to avoid contact with rain.

Check out cloud pillow at Nilkamal Sleep

Immediate Rust Removal

With its anti-rust finish, it is hard for your striker metal bed to get rust. However, it may get rusted when not properly taken care of. When such a thing happens, ensure to take care of rust immediately. The sooner it is taken care of, the sooner you prevent it from spreading. Here are some easy ways to remove rust from your bed:

White vinegar has an intrinsic acidic nature. Mix it with common salt and apply the mixture to the rusted area. Leave the paste for 10 minutes and then wipe it off.
For slight rusting, make a mixture of lemon and salt. Apply the mixture to the rusted part. Leave it for a few hours. Then wipe off.
Take a small piece of aluminium foil. Dip it in vinegar or water. Then, rub the aluminium piece on the rusted part. Then, watch as the rust vanishes.
Gently brush off the rust with sandpaper or a wire brush.
Apply wax paste to prevent the spread the rust.

All of the above methods clear the rust. To clean the paste, use a tough cloth or pad.

Covered When Unused

Metal rusts regarding moisture and oxygen, both available in the air. When you use your metal bed and clean it regularly, it doesn’t get rusted. However, when you are away, your single metal bed is not in use, and it doesn’t get cleaned regularly, exposing it to damaging substances. So, when you are not using your bed, ensure to cover it up to prevent exposure to air. Use a tarp or any other waterproof material to cover your bed.

Check out Smart Aroma Diffuser at Nilkamal Sleep

Regularly Check Joints

Regular cleaning is an excellent way to lengthen the appearance of your metal bed. However, along with the good looks, you must also ensure your bed stays durable and sturdy. For this, also check the joints, bolts and nuts regularly. Otherwise, you will hear your bed squeak or shake. For this, tighten the bolts and screws with a screwdriver. Then, to prevent dust from accumulating in the gaps of the joints, clean them with a brush and then oil them or spray a lubricant. Lubricating the joints will prevent any squeaks, and your bed will be stable.

Conclusion

Regular care and maintenance of your striker metal bed is the best way to ensure its appearance and structure stay the same for a long time. Use these tips for the upkeep of your metal bed and enjoy the everlasting appeal of your bed. To buy bed online, visit Nilkamal Sleep.